Thermal
analysis equipment
Aparato
para el ensayo del Módulo de Rotura en Caliente (HMOR)
El sistema de este horno se desarrolló
para la investigación del módulo de rotura en
caliente de los nuevos materiales refractarios. Alcanza una
temperatura máxima de 1600 °C. El diseño estanco
a los gases permite la utilización de distintas atmósferas.
La presión parcial de oxígeno se regula en tiempo
real mediante un sensor de oxígeno. Tiene instalado un
sistema de raíles móviles que permite la introducción
simultánea de 6 probetas. El transporte de las probetas
es semi-automático. Se pueden ensayar probetas de 25x25x150
mm de acuerdo con el método de ensayo a flexión
en tres puntos. Todos los procesos y datos experimentales se
registran a través del software suministrado con el sistema
y se pueden procesar con posterioridad utilizando software de
procesamiento de texto, etc.
.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
High
Temperature Viscosity and Corrosion
This special equipment combines the measurement of viscosity
of special glasses at high temperatures with the determination
of corrosion of refractory materials in contact with glass according
to the finger test method. The viscosimeter can be easily removed
and substituted by the unit for corrosion testing. The furnace
has a hearth that drives up and down which can also be rotated.
The speed of rotation can be varied continuously. The door in
front gives easy access to the furnace. This equipment combines
the investigation of two important material properties in one
efficient and cost effective equipment.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Hot Flexural Strength (3-point) of
SOFC ceramic plates
model: Split (SOFC: solid oxide fuel cell)
Testing furnace is designed for installation in an existing
testing machine. Features: Tmax: 1100 °C, 200 x 100 x 200 mm
(w x h x d) usable volume Very good temperature uniformity through
4-sided heating in spite of a 100 x 100 mm window in front.
The back wall is designed as a door. The furnace is split in
the vertical axis. Both halves can be slid outwards. 200 x 200
mm opening in the floor. Water cooled steel casing.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Contact
angle measurements at elevated temperatures
The study of surface chemistry is an increasingly important
aspect of analytical technology. The furnaces can also be designed
for operation under gas atmospheres.
Complete systems are offered in cooperation with the company
Data Physics GmbH.
furnace
for 1300°C
furnace
for 1500°C under gas atmosphere
furnace
for 1700°C with carrousel for
8 samples ans preheating
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Más
Enlaces
Hornos
tubulares especiales
Hornos
especiales
Hornos
de cámara con atmósfera inerte
