:: Productos ::
++++ H o r n o s   T u b u l a r e s   E s p e c i a l e s
:: Novedades ::


Hornos de Cámara

Hornos de Ascensor

Hornos Tubulares

Hornos de Vagoneta

Hornos Especiales

Estufas con Circulación
de Aire Caliente

Hornos de Carga Superior

2100°C en Aire

Informática

Hornos 2a mano

principal

Special Tube Furnaces

Special furnace for installation in a laser machining center
Vertical tube furnace up to 1800°C. Special sample holder in order to hold and rotate the specimen at 1800°C. The workpiece can be changed easily.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Special Furnace for Waste Water Treatment TOC/TN-measurements)
The TOC-value (Total Organic Carbon) is a clear indication of the total organic load of waste water. All environmentally relevant forms of nitrogen are added together in the parameter Total Nitrogen (TN). The furnace shown here was developed together with a manufacturer of such analytical systems. lt is small enough to fit into a mobile cabinet. The furnace is designed to operate constantly at high temperatures. The maximum furnace temperature is 1000 °C.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Horno de calibración de hasta 1700 °C
Este horno está concebido para la calibración de termopares de alta temperatura. Se pueden calibrar 5 termopares simultáneamente. La longitud calorifugada se divide en 5 zonas de calentamiento que pueden ser reguladas separadamente. Todas las zonas se regulan con alimentadores de potencia de CC. La carcasa del horno está refigrerada por agua para evitar disipaciones caloríficas.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Combination of a High Temperature Special Furnace up to 1700 °C
with Tube Furnaces up to 1200 °C

The picture shows a high temperature box furnace for 1700 °C. Two tube furnaces for 1200 °C are installed on one side of the box furnace. This combination of three different furnaces is used to investigate highly corrosive materials in the glass industry. The bottom drives up and down electromechanically and can be rotated simultaneously at predefined speeds. Through an opening in the roof of the box furnace and with the help of a lifting and turning mechanism specimens can be transferred between the three furnaces. All three furnaces can be regulated separately. The status and fault reports are shown on a common alphanumeric text display.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Más Enlaces
Thermal analysis equipment
Hornos especiales
Hornos de cámara con atmósfera inerte


Horno de Ascensor de gran volumen
hasta 1750°C, 450L

Horno Tubular para pirólisis a escala piloto

+++++++++++

email

Formulario Online
Mapa de Agni 

..